Home > Windows Me > Windows Me Reinstalling

Windows Me Reinstalling

You will not normally want to use this switch. /d Will not recognize previously installed version of Windows, if present. Do them one at a time and follow the directions that came with them. Follow through the setup screens accepting the default choices (unless you are versed and comfortable with making any changes). You will be required to enter your Certificate of Authenticity at some point during the setup, make sure you have it available.

Also, Windows Me Setup may require the CD-ROM during install, if you're using the Step-Up or Upgrade edition to perform the full installation. You can make a boot floppy with various DOS commands on it in Windows 95 or 98 by going to Control Panel -> Add/Remove Programs -> Startup Disk and clicking the Please try again now or at a later time. Good luck! http://www.windowsreinstall.com/indexwinme.htm

After gathering your software, get a pad and pencil and follow this procedure to make a note of the hardware on your system: RIGHT Click on My Computer Click Properties from Phone call Text message Facebook Messenger Other View Results Loading ... Because of the vast differences in hardware and software, I cannot possibly cover every nuance. Discussions cover Windows 2003 Server, Windows installation, adding and removing programs, driver problems, crashes, upgrading, and other OS-related questions.Real-Time ActivityMy Tracked DiscussionsFAQsPoliciesModerators General discussion how do I uninstall, then reinstall windows

  • Select edit then find from the menu. 3.
  • Type in Product Key.
  • Change the letter E in my example to your CD-ROM's drive letter. 8.
  • Language, Country/Region, Keyboard Layout, and Time Zone options follow that.
  • The biggest single file in your Windows directory may be the swap file.
  • The following checklist explains the steps you need to take before you upgrade Windows 9x to Windows Me: Upgrade checklist: Read the README.TXT file on the Windows Me CD-ROM: No one
  • Step three Back up your data files.

kangarko 35,153 views 1:14 Windows Me installation - Duration: 3:59. David Kimball 2,935,344 views 8:27 How to install Windows Millenium Edition (ME) inside VMware Workstation - Duration: 2:43. Open Add/Remove Programs properties in Control Panel. 3. If you matched your list of hardware up with the Windows Me HCL, you shouldn't have any problems.

About CNET Privacy Policy Ad Choice Terms of Use Mobile User Agreement Help Center At this point, the most crucial step in the Wizard appears: Save System Files (Figure). Don't worry about eating too much space with this; support software often comes on CDs these days, but the actual driver installation directory (generally called something handy like "Win95") is frequently internet It explains how to use the format and FDISK tool.

There's something very odd about the Windows 9x family in that performance degrades dramatically over time. Then, launch all of your installed software to ensure that you don't need to reinstall anything. If you're a clutter victim, putting drivers on your hard drive can save your sanity. Any programs or utilities you downloaded directly from the Internet will need to be re-downloaded unless you have saved the installation file some where and can back it up now.

When you insert the Windows Me Step-Up or Upgrade CD-ROM, the system will start the installation front-end and ask whether you'd like to upgrade (Figure).

Step one You'll need a full-install version of Windows. What comes after the format involves the techy knowledge. I am, in this respect, approximately 85% qualified to be a Microsoft phone support person.

I recommend going through each option carefully, since I generally disagree with the defaults that Microsoft suggests. When you're looking at a C:\> prompt in DOS, type "cd oldwin", then "del win386.swp" to kill it. but if you don't really mind losing everything on your comp and starting over again then go with the bootable cd. Not recommended, as Microsoft's minimum requirements are already too low for this OS. /nostart Causes Setup to perform only the File Copy portion of Setup, without actually installing Windows Me.

Since many of the sites that I used to refer listeners to regarding this subject have either disappeared or no longer have the information, I am starting a multi-part tip outlining Creating A Windows ME Startup Disk: 1. Once the compliance check is complete (Figure), reinsert your Windows Me CD-ROM and continue. Now let's embark on the "how to" of formatting a hard drive.

BIOS or CMOS). Note: After pressing X Windows install GUI will begin. Watch Queue Queue __count__/__total__ Find out whyClose Windows ME installation Part 1 Techman224 SubscribeSubscribedUnsubscribe227227 Loading...

Please TRIPLE check that you have backed up any important data and that your backups are indeed functional.

Windows Me will let you choose the partition to which to save the system files (if you have more than one) and will then perform this crucial task (Figure). Wait 30 seconds and restart the computer. Note : If your not comfortable with browsing the registry you can download this program to your desktop and double click it. Released on the 31st December 2000, Windows ME proved to be unpopular, buggy and for this reason only lasted for one year before being replaced by Windows XP on the 25th

That means you will have to reinstall all programs. Check out this link for information about installing and trouble shooting hardware drivers. Buy the proper version of Windows Me. Your computer also may briefly display "press the (key) to enter Setup"….use it.

Windows XP appeared almost two and a half years ago and has proved to be quite stable and resilient so I'm reserving judgment as to how often it should be done Polls Archive Toner Cartridge Depot Free Email Newsletter Enter your email address:Delivered by FeedBurner Donate today if you found some helpful information! If you've copied them to C:\WIN98\, then type "cd win98" from the C:\> prompt; if you've copied them to a second hard disk called D: then type "d:" and then "cd Formatting deletes all applications AND data from your computer.

The following table compares Microsoft's stated minimums with my own recommendations. The setup program is, inventively, called SETUP.EXE, so just typing "setup" will run it. Insert your Windows CD Shut off your computer Unplug any peripherals attached to the computer (printers, handheld computers, cameras, scanners, etc.) All you want plugged in is your keyboard, mouse, and Add to Want to watch this again later?

Normally, you will not need to specify this option, as this directory will be deleted after installation anyway. [script file] Allows you to specify the name of a script file that I answered that question along with the ‘why' above….at least every two years for any Windows version but Windows XP. You should be keeping regular backups anyway, of course. Insert a formatted 3.5 floppy and double click the WINME.EXE file you just downloaded.

But a clean install requires a couple of additional steps. Performing this routine purges your computer of any little errors and irritations that have cropped up and thus makes your computer feel and run like ‘new' again. With regards to software, the removal of Real Mode DOS has similar repercussions. Upgrade versions also work if you have the original install media for some other version of Windows, which of course you ought to have handy, but if you for some reason

Print reprints Favorite EMAIL Tweet Please Log In or Register to post comments. Why would I need to format my hard drive? A Windows ME start up disk (also known as boot disk). Locate windows product key in the registry: 1.

Loading... Deleting it can give you a lot of space back quickly, without running a disk cache.