Home > Windows 98 > Windows 98 Not Reconginzing Cd-rw

Windows 98 Not Reconginzing Cd-rw

Contents

If you're lucky, you'll have this either on a floppy disk or CD-ROM that came with your drive. If it does not, go to the next step. Visit now Z7_3054ICK0KGTE30AQO5O3KA30H4 hp-feedback-banner-portlet Actions ${title} Loading... I doubt the OS police will come after you since the OS is basically dead.

Click OK to close the window. That's all. (in safe mode in Win-98, the CD drivers are NOT loaded so the CD drive is effectively DEAD.)Setting up and partitioning that 160 gig HD as 20/140 will work Close Device Manager and restart the computer. Windows 98 isn't supported anymore.

Windows 98 Cd Rom Driver

If you're going to play with Linux on a very old box, Puppy is a good place to start; or, if you have at least 128MB RAM, Xubuntu. Also, I can't find a web page for Top Glory or any of the others. · actions · 2001-May-6 10:00 pm · vice8686join:2000-10-13Lancaster, CA vice8686 Member 2001-May-6 10:30 pm Just shooting Then copy all the setup and .cab files into this directory from the CD. When asked for the CD point it there, and you will not need the CD.

if this is your case as well use knoppix (which does rule), boot the computer into knoppix and drop the drivers into your hard drive reboot into windows and place the Type the following at the command prompt: diskpart Enter list volume at the command prompt. Flag Permalink This was helpful (0) Collapse - The usual. Do not use music discs.

ECS used to have a bad rep as a cheap mobo, all around, having problems.www.viaarena.com (I think) for the 4in1 chipset drivers, which you will have to burn on a CD Windows 98 Dvd Drivers To do so, you need to find out precisely what model of CD-ROM drive it is that you have. Try burning the disc at 4x before playing it from the computer. http://www.tomshardware.com/forum/1762-48-drives-wont-recognize-help I've found that the best way around it is to set up your hard drive with a Windows ME boot disk first.Win-98 cannot see that 160 gig drive to its fullest.It

The /D:mscd001 /v part of the line renames the driver when it is loaded into memory. Sorry, there was a problem flagging this post. Thank you for helping us maintain CNET's great community. Your Windows 98 Startup Disk should now be guaranteed to work with your CD-ROM drive.

Windows 98 Dvd Drivers

Ask MetaFilter is where thousands of life's little questions are answered. Wait about 20 seconds for the disc to achieve full spin velocity. Windows 98 Cd Rom Driver If it works, you are done. How To Install Windows 98 Is being in IT simply being a contractor now?! [No,IWillNotFixYour#@$!!Computer] by MineCoast332.

If he had booted with the Win98 startup disk that came with the CD disk, it will find and use the CD drive.When you boot from the floppy, it does not Slide the drive out of its bay and you ought to be able to find a sticker somewhere on its casing that identifies its unique FCC ID. If several discs work but one does not, the disc is probably bad or is scratched. If it does not, go to the next step. Windows 98 Download

  • Go here and download and install it.
  • If you believe this post is offensive or violates the CNET Forums' Usage policies, you can report it below (this will not automatically remove the post).
  • thanks in advance to any help · actions · 2001-May-7 5:19 am · Hayward K A R - 1 2 0 CPremium Memberjoin:2000-07-13Key West, FL
Hayward Premium Member 2001-May-7 5:30 am
  • Sorry, there was a problem flagging this post.
  • Windows 98 does NOT by default copy the cab files to the HD.Windows Millennium does however, but these are not normal cab files.
  • On many systems you must use CS, maybe not yours since it has Win98, but you should at least try it.
  • Thanks, Angus.C Discussion is locked Flag Permalink You are posting a reply to: Win. 98 won't detect IDE CD-ROM The posting of advertisements, profanity, or personal attacks is prohibited.
  • Empty the Recycle Bin.
  • It's a great Tech-Tool.This is as close as I can get to handing you the disk.I used it to set up my own 160 gig SATA drive before installing XP.Yes, XP Click OK. I have over … [Read More...]Technology Rapidly Changing The Face of Home CareTechnology and medical advances are allowing people to live longer and healthier lives.  From this industry a new frontier Using a text editor such as Wordpad, add a line that references the gscdrom.sys file.

    Fdisk that Hdd, with a 136gb main, and the rest a storage partition, or 50/50. All posts copyright their original authors. All the files in them have numbers, and only Windows knows what file is which.

    Insert a disc that contains files into the drive that is having the problem.

    That's a big indicator that the OS is causing the issue, not the drives. June 18, 2007 Tags windows windows98 dvd dvd-rom dvd-rw cd cd-rom cd-rw drives Share Twitter Facebook

    About Ask MetaFilter Ask MetaFilter is a question and answer site that covers nearly ECS might supply all this, but what I've seen is for XP only?I don't believe XP has a "trick" as older OS'd do about win.com to win.old and using the XP One thing that is … [Read More...]Best Productivity Boosting Apps for 2017One thing is for certain — software is developing at such rate that it has become increasingly hard for us

    Complementary Content ThemeWelcome · log in · join Show navigation Hide navigation HomeReviewsHowChartsLatestSpeed TestRun TestRun PingHistoryPreferencesResultsRun StreamsServersCountryToolsIntroFAQLine QualitySmoke PingTweak TestLine MonitorMonitor GroupsMy IP isWhoisCalculatorTool PointsNewsNews tip?ForumsAll ForumsHot TopicsGalleryInfoHardwareAll FAQsSite FAQDSL FAQCable I have two physical hard drives, so the CD-ROM was previously installed on path E:/ .I have exactly the same problem on another similar computer, running the same version of Windows In Windows 98 and Me, right-click My Computer. If it works, you are done.

    mark by one of the drive controllers. Arris SB8200 Activation Issues (Cisco CMTS) [ComcastXFINITY] by RedTechie2274. Usually this is completely un-necessary as the WINDOWS/OPTIONS/CABS (sometime Install Files) has all the WIN98 CAB files in them. If you prefer to start over, you can do what others have suggested and just create a setup directory on the hard drive (e.g., c:\windows\options\cabs); then copy all of the setup

    XP will find all the hardware and install the required drivers. Win-98 just needs to be running in Normal Mode. Track this discussion and email me when there are updates If you're asking for technical help, please be sure to include all your system info, including operating system, model number, and If you have jumpered it correctly on the second system, then it should work.

    I tried to use the Oak Technologies drivers that come on the Bootdisk, as Microsoft suggests, but nothing works. mark by the secondary hard drive controller. Flag Permalink This was helpful (0) Collapse - Re:Re:Win. 98 won't detect IDE CD-ROM by JMarchi / December 26, 2003 12:04 AM PST In reply to: Re:Win. 98 won't detect IDE The portion of the Config.sys file that you're interested in are the lines marked as [CD], where the set of generic CD-ROM drivers are referenced.

    Sites MetaFilter AskMeFi FanFare Projects Music Jobs IRL MetaTalk Best Of Podcast Links Home FAQ About Archives Tags Popular Random Wiki Search Chat Labs Members Sign Up Log In Search MetaFilter… But, the company behind the search engine has evolved into a … [Read More...] Return to top of page Copyright ©2017 About | Privacy | Contact Information | Wrtie For Us Figure : Command Prompt window Press Enter and look at the list. Mozy is currently offering free 2GB online data backup accounts.  NO credit card or any other bull is needed to … [Read More...]Google Apps For Business is Making StridesGoogle has evolved

    Step 5: Reinstalling the drive in Device manager Remove and reinstall the drive name in Device Manager: In Windows XP, select Properties, click the Hardware tab, and then click the Device pctechguide.com Home Guides Tutorials Articles Product Reviews Glossary Installing Windows 98 - Getting Your CD Drive to Work for Installation A Windows 98 Startup Disk is a considerable improvement on that It's a good possibility that your drivers are new, and Win98 can't use them, so it's defaulting to the old OAK drivers that are part of the installation. Do it often.